====== Node naming ======
FIXME Node naming scheme draft

Prefix: <nowiki>OS</nowiki><sup>(OpenShell.no)</sup>


^ Node type ^ Format ^ Example ^ Description ^
|Gateway|''{prefix}{n}''|''OS0, OS10''|These nodes relay packets to the internet.|
|Repeater|''{prefix}r{n}''|''OSr0''|The main purpose of these nodes is to extend the range of the network.|
|Battery|''{prefix}b{n}''|''OSb0''|These sensors measure the voltage of a battery (solar bank, or otherwise). Usually also a repeater node, as power available is relatively large on a UKHASnet scale.|
|Sensor|''{prefix}s{n}''|''OSs0''|Sensor nodes. May in some cases also repeat, but might not, to save battery.|
|Vehicle|''{prefix}v{n}''|''OSv0''|Nodes that move and report location.|

====== List of nodes ======
^Name^Type^Description^
|[[https://ukhas.net/nodeInfo?name=OSPi1|OSPi1]]|[[.node:PiUploadTest]]|This is just a simple upload test script written in Python. No radio. Uploads the core temperature of a RaspberryPi v1 Model B1|
|[[https://ukhas.net/nodeInfo?name=OS0|OS0]]|[[.node:RTL-SDR GW]]|RTL-SDR based gateway node.|
|[[https://ukhas.net/nodeInfo?name=OS2|OS2]]|Breadboard|WeMos D1 Mini + RF69HW on a breadboard.|
|[[https://ukhas.net/nodeInfo?name=OSb0|OSb0]]|[[.node:atmega328:batterymonitor]]|ATmega328P based node for 12V battery monitoring.|
|[[https://ukhas.net/nodeInfo?name=OSr1|OSr1]]|[[.node:cube1in9:atmega328pb_rfm69|ATmega328PB-v1]]|Repeater node. Solar panel.|
|[[https://ukhas.net/nodeInfo?name=OSv0|OSv0]]| ::: |Portable node with GPS.|