**Venue:** [[http://www.kingsmanorfarm.com/kings_orchard.html|Kings Orchard House, Kings Manor Farm]]
**Dates:** 17th - 19th March (Friday >3pm through to Monday <10am)
**House Information Sheet:** [[https://ukhas.net/wiki/_media/workshops:kingsorchard_information.pdf|Kings Orchard Information]]
====== Transport ======
Will most likely consolidate cars in Southampton to take kit across on the ferry.
Some people may be taking bicycles across.
====== Arrival ======
^ Name ^ Travelling from ^ Method / Spare Seats ^ Time arriving in Soton ^ Mainland -> Island Transport Method / Spare Seats ^
| James Coxon | Northamptonshire | Car / 4 | ~2030 @ Lymington | Car Ferry / 4 |
| Mat | Northamptonshire | Plane* / 1 (Russ) Plan B :-( | Sandown before sunset | Air :-) / 2 |
| David Brooke | Beaulieu (I'm being a tourist) | Car / 3 | 17:20 @ Lymington | Car Ferry / 3 |
| David Turner | Cambridge | Car / 3 | 1905 @ Lymington | Car Ferry / 3 |
| Phil Crump | Southampton | Car / 4 | 2005 @ Lymington | Car Ferry / 4 |
====== Departure ======
^ Name ^ Time leaving ^ Mainland Method / Spare Seats ^ Destination ^ Destination Method / Spare Seats ^
| James Coxon | 5pm Sunday | Car Ferry / 4 | Northamptonshire | - |
| Mat | Weather dependent - late Sunday before sunset/Monday am | Plane* / 1 (Russ) Plan B :-( | Northamptonshire | Air / 2 |
| David Brooke | Yarmouth@15:30 Monday | Car Ferry / 3 | Cambridgeshire | Car / 3 |
| David Turner | Yarmouth 1405† | Car ferry / 3 | Cambridge | Car / 3 |
| Phil Crump | Yarmouth 20:10 Monday | Car ferry / 3 | Southampton | Car / 3 |
* Weather permitting - plan B is James' car; plan C is my car
† Will get a pub lunch before ferry.
====== Equipment/Kit ======
=== Wanted ===
extension cords!
=== Bringing ===
* James Coxon
* 3d printer + filament
* lots of pcbs/stm32f0
* usb/serial + stlink
* a few working nodes
* Quadcopter with UKHASnet node ([[https://ukhas.net/nodeInfo?id=193|QUAD0]])
* Other junk
* Phil Crump
* Wifi AP + Ethernet
* hasnetSupplies stock + other pieces
* usb gateway
* AVR ISP + BMP
* Bench Power Supply
* Rigol Scope
* Soldering Iron
* David Turner
* 5x nodes with temperature, humidity, pressure, light
* 5x nodes with above + Grid-Eye 8x8 thermopile array
* 1x USB gateway
* 4x repeater nodes (need some firmware bodging)
* 10m and 7m fishing poles for antennas/repeaters
* "AdamMagic" ARM SWD programmer
* Salae Logic 4 logic analyser
* 2x 868MHz yagi antennas (With male SMA cable)