Table of Contents

Moteino (Arduino) node design
- Setting up as UKHASnet Node
- 3d Printed Case

Moteino (Arduino) node design

Based on the Moteino development platform from LowPowerLab
- ATmega328
- RFM69HW
- MCP1700
- Optional SPI Flash Memory
Advantages
- Nice SMD design
- Reasonable Price
Disadvantages
- No UK sellers - need to get from US

LowPowerLab Website

Setting up as UKHASnet Node

Solder FTDI header to moteino
Wire up to USB-Serial e.g. FTDI or Uno board (with ATmega328 removed)
Download UKHASnet-firmware
Go to arduino_gateway and change NodeConfig-template.h to NodeConfig.h
Open up the .ino
Edit NodeConfig.h for the correct settings of your node
Compile and upload to the Moteino

Will work out of the box - does not require any pin changes.

3d Printed Case

Moteino Measurements
- 23.3mm x 33.2mm x 4.5mm
- length with headers on ftdi 42.0mm