Equipment List

Please add below if you are bring any equipment that might be useful.

• Multimeter
• 2 boxes of spare parts and junk (inc old GPS modules)
• 10x LPC812/RFM69 kits which could be used as buoys
• Epoxy resin kit
• Wire

• 10 portions slightly out of date sugru (has been in a fridge the entire time though)
• hand drill + drill set (m3 and upwards)
• 1 cm diameter flexible plastic tubing
• candles for old fashioned waterproofing
• large plastic container for floating, balancing tests
• 3 position based switches (wave detection?)

• RG174
• Bits of wire
• Tools (TBD)

• AVR ISP
• multimeter
• saleae logic
• 7 RFM69HW
• bench PSU
• USB serial leads
• tools
• jam jars
• misc. leaded components (enough for a couple of sensor V3 and LPC810 nodes)
• a log periodic which might have a bit of gain at 868MHz and a short pole

• AVR ISP
• Multimeter x2
• Salae Logic Clone
• Dual Bench PSU
• Tools
• AVR Sensor v3 PCBs
• Stripboard
• 3x Neo-6M+Patch

• AVR ISP
• Multimeter
• Saleae Logic 8
• 3x HopeRF RFM69HW
• 3x AVR Sensor v3 PCBs
• Soldering Tools
• 1m 60mm PVC Pipe
• Epoxy