User Tools

Site Tools


esp8266_firmware_update

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
esp8266_firmware_update [2014/11/28 19:01]
chrisstubbs [Windows]
esp8266_firmware_update [2014/11/29 15:54] (current)
chrisstubbs [Windows]
Line 37: Line 37:
   - Put the ESP8266 into firmware update mode by grounding GPIO0 and re-cycling the power.   - Put the ESP8266 into firmware update mode by grounding GPIO0 and re-cycling the power.
   - Launch XTCOM_UTIL.   - Launch XTCOM_UTIL.
-  - In the Tools menu choose Config Device and set the Com port and set the baud rate to the value you used during testing (57600 or 115200). Click Open the Connect but **don'​t close this panel**.+  - In the Tools menu choose Config Device and set the Com port and set the baud rate to the value you used during testing (57600 or 115200). Click Open then Connect but **don'​t close this panel**.
   - From the API TEST(A) menu choose Flash Image Download and browse to the downloaded firmware .bin file   - From the API TEST(A) menu choose Flash Image Download and browse to the downloaded firmware .bin file
   - Click DownLoad to start the update - the progress bar will confirm it's under way.   - Click DownLoad to start the update - the progress bar will confirm it's under way.
esp8266_firmware_update.txt ยท Last modified: 2014/11/29 15:54 by chrisstubbs