User Tools

Site Tools


guides:rasp_pi_design

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
guides:rasp_pi_design [2016/03/27 12:51]
mfa298 [Software]
guides:rasp_pi_design [2020/06/27 23:02] (current)
Line 9: Line 9:
 Russ has a very simple hat-like PCB for neatly attaching a RFM69 to the Pi: https://github.com/russss/raspberry-pi-rfm69 Russ has a very simple hat-like PCB for neatly attaching a RFM69 to the Pi: https://github.com/russss/raspberry-pi-rfm69
  
 +Alternatively, the [[http://shop.ciseco.co.uk/slice-of-pi-add-on-for-raspberry-pi/|Slice of Pi]] prototyping board has some 2mm spaced holes (intended for an XBee style module) which make it relatively easy to attach an RFM69 as shown [[dbrooke_nodes:dbpg|here]]. This can be used on older Pi boards with the 26 pin GPIO connector as well as newer ones with the 40 pin connector.
  ===== Software =====  ===== Software =====
  
guides/rasp_pi_design.txt ยท Last modified: 2020/06/27 23:02 (external edit)