dbrooke_nodes:dbd1
This AVR Sensor Board V3 node has all components and headers installed and has a DHT22 as the sensor. The antenna is a 1/4 wave wire.
It is running from 3 AA alkaline cells installed in a battery holder salvaged from a time expired CO detector.
The housing is an off the shelf ABS box which, although not intended to be waterproof, is reasonably sealed and has a recess at the bottom which provides some shelter to the otherwise exposed DHT22 sensor.
dbrooke_nodes/dbd1.txt · Last modified: 2020/06/27 23:02 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
