workshops:southampton2015:equipment
Equipment List
Please add below if you are bring any equipment that might be useful.
Jcoxon
- Multimeter
- 2 boxes of spare parts and junk (inc old GPS modules)
- 10x LPC812/RFM69 kits which could be used as buoys
- Epoxy resin kit
- Wire
Lila
- 10 portions slightly out of date sugru (has been in a fridge the entire time though)
- hand drill + drill set (m3 and upwards)
- 1 cm diameter flexible plastic tubing
- candles for old fashioned waterproofing
- large plastic container for floating, balancing tests
- 3 position based switches (wave detection?)
Mike
- RG174
- Bits of wire
- Tools (TBD)
Dbrooke
- AVR ISP
- multimeter
- saleae logic
- 7 RFM69HW
- bench PSU
- USB serial leads
- tools
- jam jars
- misc. leaded components (enough for a couple of sensor V3 and LPC810 nodes)
- a log periodic which might have a bit of gain at 868MHz and a short pole
Phil
- AVR ISP
- Multimeter x2
- Salae Logic Clone
- Dual Bench PSU
- Tools
- AVR Sensor v3 PCBs
- Stripboard
- 3x Neo-6M+Patch
Ben
- AVR ISP
- Multimeter
- Saleae Logic 8
- 3x HopeRF RFM69HW
- 3x AVR Sensor v3 PCBs
- Soldering Tools
- 1m 60mm PVC Pipe
- Epoxy
workshops/southampton2015/equipment.txt · Last modified: 2020/06/27 23:02 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
